||Intel® Core™ i3-7100 3.9 GHz dual-core processor
||Total DIMM slots: 4
Maximum memory: 64 GB (16 GB x4)
Memory modules pre-installed: 8 GB DDR4 RAM (4 GB x 2)
Note: The pre-installed memory modules need to be replaced when expanding the memory to over 24 GB.
|| 2 x M.2 2242/2260/2280/22110 SATA 6Gb/s SSD
1. The M.2 SSD is not included as standard.
2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
|Hard Drive Tray
||2 x 2.5” SSD, max 9.5mm drive height
4 x 2.5”/3.5” hard drive or SSD
||SATA 6Gbps/3Gbps; Hot-swappable
||1 x USB 3.0 port (Front)
4 x USB 3.0 port (Rear)
|| 4 x GbE port (10GbE and 40GbE are supported with the purchase and installation of compatible network adapters)
1. For a list of compatible network adapters, please visit the Compatibility List.
2. For instructions on how to install network adapters, please refer to Chapter 6 of the QNAP NAS Hardware Manual.
||Input: 2 x 6.3mm MIC In
||Output: 2 x built-in speaker, 1 x 3.5mm Line-out jack
Note: Only one of the above audio output ports can work at a time. If a speaker is connected, the sound will output through the speaker.
||System status, 2.5” SSD, M.2 SSD, 3.5” HDD
||System: Power button, Reset button, USB one-touch-backup button
|| 231.9 (H) x 224.9 (W) x 319.8 (D) mm
9.1 (H) x 8.9 (W) x 12.6 (D) inch
||Net (NAS only): 7.7 kg
Gross (with packing and accessories): 9.21 kg
|Sound Level (dB)*
||Sound pressure (LpAm) (bystander position): 20.5 dB
(with 4 x Seagate ST2000VN000-1HJ164 hard drive installed)
||5~95% non-condensing, wet bulb: 27˚C
||Input: 100-240V~, 3-1.5A, 60-50Hz; Output: 250W
||2 (1* PCIe Gen3 x16; 1* PCIe Gen3 x4)
||System: 1 x 8 cm cooling fan
CPU: 1 x 9 cm fan