F211 - 3U Compact PCI Ethernet Board

F211 - 3U Compact PCI Ethernet Board

3U CompactPCI Ethernet ボード

4 HP 32-bit/33-MHz CompactPCI

10 Base-T/100Base-TX



F211 Specification
Ethernet Interface '• Four 10/100Base-TX interfaces
• Four Micrel KSZ8841 controllers
• IEEE802.3x support
- Full-duplex flow control
- Half-duplex back pressure collision flow control
• Internal 8KB RX/TX FIFO buffers
• Auto-negotiation and auto MDIX crossover
• LinkMD® cable diagnostics to determine cable length, cable faults and distance
to fault
• Media Access Control (MAC) addresses stored in on-board serial EEPROMs
• 4x2 status LEDs to signal link status, activity, speed and collision
Front Connections • Four standard 8-pin RJ45 receptacle connectors
CompactPCI® Bus • Compliance with CompactPCI® Core Specification PICMG 2.0 R3.0
• Peripheral slot
• 32-bit/33-MHz PCI-to-PCI bridge
• V(I/O): +3.3V or +5V (Universal Board)
Electrical Specifications • Isolation voltage: 1000V between Ethernet links and 1500V between Ethernet
links and shield or ground
• Supply voltage/power consumption:
- +3.3V (-3%/+5%), 1A max.
• MTBF: 875,481h @ 40°C according to IEC/TR 62380 (RDF 2000)
Environmental Specifications • Temperature range (operation):
- -40..+85°C (qualified components)
- Airflow: min. 10m³/h
• Temperature range (storage): -40..+85°C
• Relative humidity (operation): max. 95% non-condensing
• Relative humidity (storage): max. 95% non-condensing
• Altitude: -300m to + 3,000m
• Shock: 15g/11ms
• Bump: 10g/16ms
• Vibration (sinusoidal): 2g/10..150Hz
• Conformal coating on request
EMC EN 55022 (radio disturbance)
IEC1000-4-2 (ESD)
IEC1000-4-4 (burst) with regard to CE conformity
Software Support Drivers for Windows®, Linux and VxWorks® from Micrel
Driver for QNX® from QNX®