A17 - 6U MPC8548搭載VMEボード

A17 - 6U MPC8548搭載VMEボード


6U VMEボード



A17 Specification
CPU PowerPC® PowerQUICC™ III MPC8548, MPC8548E, MPC8543 or MPC8543E
• 800 MHz up to 1.5 GHz
• Please see Standard Configurations for available standard versions.
• e500 PowerPC® core with MMU and double-precision embedded scalar and vector floating-point APU
• Integrated Northbridge and Southbridge
Memory 2x32 KB L1 data and instruction cache, 512 KB/256 KB L2 cache integrated in MPC8548/MPC8543
Up to 2 GB SDRAM system memory
• Soldered
• DDR2 with or without ECC
• Up to 300 MHz memory bus frequency, depending on CPU

16 MB boot Flash
128 KB non-volatile FRAM
Serial EEPROM 8 kbits for factory settings
Mass Storage Up to 4 GB soldered ATA Flash disk (SSD solid state disk)
• Higher capacity possible when components are available
• FPGA-controlled
IF ■Front Connections
Two Ethernet (RJ45)
COM1/COM2 (RJ45)
XMC/PMC 0 and PMC 1
■Rear I/O
Two 10/100/1000Base-T Ethernet on P0 (option)
Mezzanine rear I/O: PMC 0 on P2
Mezzanine Slots
Two slots total, one slot usable for PMC or XMC
One XMC slot
• Compliant with XMC standard VITA 42.3-2006
• PCI Express® links: one x1 or one x2 or one x4
Two PMC slots
• Compliant with PMC standard IEEE 1386.1
• Up to 64-bit/64-MHz, 3.3 V V(I/O)
• PMC I/O module (PIM) support through J4 complying with VITA 35 (PMC 0)
Environmental Specifications Temperature range (operation):
• -40..+85°C (screened)
• Airflow: min. 10 m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +3,000 m
Shock: 15 g, 11 ms
Bump: 10 g, 16 ms
Vibration (sinusoidal): 1 g, 10..150 Hz
Conformal coating on request
EMC Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support Linux
QNX® (on request; support of the FPU is currently not provided by QNX®)
OS-9® (on request)